RINGMASTER SPORTSTER LASER CUT SHORT KIT

The Ringmaster Sportster kit is a laser cut short kit. It includes all of the laser cut ribs, formers, fuselage sides, tailfeathers, and flaps. It includes the slotted 1 X 4 X 24 Balsa block for the fuselage top, and a machined leading edge. It includes 3  36 X 48 CAD plan sheets. There are full scale templates of all the parts on the plans. Sheet 3 includes a copy of the original plans. All the parts fit together and produce an airplane that does not need a ton of filler to look good. The prototype flies very well, it is no competition stunter, but flies better than the originals. This is not a kit to collect, it is to build and fly.

The following items are needed to the kit:

4 pcs.               1/16 X 1 ½ X 24 Balsa                                     3 pcs                1/16 X 3 X 24 Balsa

2 pcs.               3/32 X ¼ X 42 Balsa                                        1 pc.                1/8 X 3 X 36  Balsa

2 pcs.              3/16 Sq. X 36 Balsa                             2 pcs.               3/8 X ½ X 7 Hardwood

1 pc.                1/8 X 36 Music wire                            1 pc.                3/32 X 24 Music wire

2 ea.                2 ½” wheels                                        1 ea.                2” wheel

4 ea.                DuBro 1/8” landing gear straps         1 ea.                3” Bellcrank

1 ea.                1/8” Flap horn                                     1 ea.                Elevator horn

1 ea.                Canopy

The canopy is available from Bill Little, I will provide his email to the buyer

Specs

Span: 38″

Area: 307

Engine: .25 – .35

Price: $140

Type: Built-up